A question about mask

严老师,您好!
想请教一下:我做correlation analysis 或者 two-sample t-tests 时限定了一个MASK(是我自己新生成的文件,不是REST软件里面的default mask)。然后,我用REST AlphaSim跑了校正用的数据。最后,我用Slice iewer 查看结果。我想知道的是:查看结果时,分别输入p value 和cluster size,那么这时候REST是否把这个多重比较校正的过程也自动限定在了MASK中?
谢谢!

如果是这样的话,先用REST image calculator把你的mask往t图像上应用一下。i1.*(i2~0)这样的表达式。

谢谢老师的回答!
其实,我发现“似乎”用MASK限定的two-sample t-test,用REST SliceViewer打开t图后,其显示的结果“似乎”会自动限制在MASK内呢。
所以,我的做法是:做完REST AlphaSim,用REST SliceView打开T/R图,输入p值和cluester size,直接得到最后的结果!
但是我不大肯定以上我观察到的现象和做法是否正确,能否给予一个直接的回答?
谢谢!

Sorry, I missed that point "MASK限定的two-sample t-test".
Then you do not need to apply that mask to the T images, cause they are already within that mask.

另外,顺便问一下:我还观察到似乎自己生成的MASK如果范围越小(体素越少),在同一p值下所需要的cluster size越大(校正到同一p值)。这个规律正确吗?
因为,我发现好像MASK小到一定程度后,在同一p值下所需要的cluster size反而越小了(校正到同一p值)。

For the same p value at each individual voxel and the same p value after correction:
the bigger the mask, the bigger the cluster size needed.

Error | Forum of resting-state fMRI

Error

The website encountered an unexpected error. Please try again later.