DPARSF error

Submitted by ayo on Thu, 11/22/2012 - 11:38

老師,
我在run更新後的程式,run了兩次皆在以下步驟停擺,不知原因為何,再煩請老師指教,謝謝

??? Error using ==> load
Unable to read file
D:\analysis\T1ImgNewSegment\CTL1967\Template_6_2mni.mat:
No such file or directory.

Error in ==> y_WarpBackByDARTEL at 33
T_MNI_Affine=load(DARTELTemplateMatFilename);

Error in ==> DPARSFA_run>(parfor body factory)
at 1521
                y_WarpBackByDARTEL(MasksName,OutFile,RefFile,DARTELTemplateFilename,DARTELTemplateMatFilename,FlowFieldFilename,Interp);
               
Error in ==> parallel_function at 462
            F(base, limit);

Error in ==> DPARSFA_run at 1496
            parfor
            i=1:AutoDataProcessParameter.SubjectNum
           
Error in ==> DPARSFA>pushbuttonRun_Callback at
1490
    [Error]=DPARSFA_run(handles.Cfg);

Error in ==> gui_mainfcn at 96
        feval(varargin{:});

Error in ==> DPARSFA at 33
    gui_mainfcn(gui_State, varargin{:});
 
??? Error while evaluating uicontrol Callback

Submitted by YAN Chao-Gan on Fri, 11/23/2012 - 01:21

Please update your SPM8. The earlier version of SPM8 doesn't generate Template_6_2mni.mat.

Submitted by ayo on Fri, 11/23/2012 - 12:56

在跑到FunImgARC中又出現了以下ERROR

??? Index exceeds matrix dimensions.

Error in ==> DPARSFA_run>(parfor body
factory) at 1927
            MatFilename=[AutoDataProcessParameter.DataProcessDir,filesep,'T1ImgSegment',filesep,AutoDataProcessParameter.SubjectID{i},filesep,MatFileDir(1).name];
           
Error in ==> parallel_function at 480
            S = F(base, limit);

Error in ==> DPARSFA_run at 1851
    parfor
    i=1:AutoDataProcessParameter.SubjectNum
   
Error in ==>
DPARSFA>pushbuttonRun_Callback at 1490
    [Error]=DPARSFA_run(handles.Cfg);

Error in ==> gui_mainfcn at 96
        feval(varargin{:});

Error in ==> DPARSFA at 33
    gui_mainfcn(gui_State, varargin{:});
 
??? Error while evaluating uicontrol Callback

Submitted by YAN Chao-Gan on Tue, 11/27/2012 - 05:16

Hi, please check your processing steps. If you selected "New Segment + DARTEL", you should choose "Normalize by DARTEL".

Submitted by ayo on Fri, 11/30/2012 - 18:06

老師,依舊出現以下的問題
實在不知原因為何??
??? Error using ==> gt
Matrix dimensions must agree.

Error in ==> DPARSFA_run>(parfor body
factory) at 1732
                Index=find(FD >
                AutoDataProcessParameter.Covremove.HeadMotionScrubbingRegressors.FDThreshold);
               
Error in ==> parallel_function at 462
            F(base, limit);

Error in ==> DPARSFA_run at 1683
        parfor
        i=1:AutoDataProcessParameter.SubjectNum
       
Error in ==>
DPARSFA>pushbuttonRun_Callback at 1490
    [Error]=DPARSFA_run(handles.Cfg);

Error in ==> gui_mainfcn at 96
        feval(varargin{:});

Error in ==> DPARSFA at 33
    gui_mainfcn(gui_State, varargin{:});
 
??? Error while evaluating uicontrol Callback

Submitted by YAN Chao-Gan on Sun, 12/02/2012 - 01:45

 你好！

不好意思，我这儿重复不出来这个问题。你能把你的参数设置.mat文件附上一份吗？

Submitted by YAN Chao-Gan on Fri, 12/07/2012 - 10:04

看起来像是你在定义Head Motion scrubbing regressors的时候出了问题，忽略了新弹出的scrubbing设定窗口。你再试试重新定义看一下。