我是新手，用DPARSFA的时候总遇到很多问题。

Submitted by 南沟泥河 on Sun, 07/17/2011 - 16:41

大家好，我是新手，有些问题想向高手请教。
我在做数据分析的时候，如果用DPARSF点击run的时候就没出过什么问题，但是由于我的参数，我觉得似乎用DPARSF做出的结果不会突出高分辨的扫描优势。于是我就换到DPARSFA，然而在应用DPARSFA的时候一点击run就会不停报错。我不确定是不是因为我的扫描参数造成的影响。我的扫描参数是：TR：4.5秒， voxel size：1.5x1.5x2.0，扫描层数：64。请问这些参数在DPARSFA下面应用的时候需要注意哪些地方呢？
谢谢！

Submitted by dongzy08 on Sun, 07/17/2011 - 19:51

你好，贴一下红色的报错信息看看。

Submitted by 南沟泥河 on Mon, 07/18/2011 - 09:01

The following modules did not run:
Failed: Smooth

??? Error using ==> cfg_util>local_runcj at 1426
Job execution failed. The full log of this run can be found in MATLAB command window,
starting with the lines (look for the line showing the exact #job as displayed in this
error message)
------------------
Running job #1
------------------

Error in ==> cfg_util at 699

Error in ==> spm_jobman at 207

Error in ==> DPARSFA_run at 821

Error in ==> DPARSFA>pushbuttonRun_Callback at 969

Error in ==> gui_mainfcn at 96

Error in ==> DPARSFA at 30

??? Error while evaluating uicontrol Callback

似乎每次都差不多就是这些内容。

Submitted by dongzy08 on Mon, 07/18/2011 - 10:42

这是在做平滑的部分出的错，个人认为，升级一下SPM会有效。比如，将SPM8的update文件直接复制粘贴到SPM8的原文件夹，重启Matlab。

Submitted by 南沟泥河 on Mon, 07/18/2011 - 17:23

你好，我照你说的把SPM8升级了，但是这次一开始就出了错。

In spm_jobman at 107
In DPARSFA_run at 235
In DPARSFA>pushbuttonRun_Callback at 969
In gui_mainfcn at 96
In DPARSFA at 30

------------------------------------------------------------------------
Running job #1
------------------------------------------------------------------------
Running 'Slice Timing'

SPM8: spm_slice_timing (v3756) 17:18:45 - 18/07/2011
========================================================================
Failed 'Slice Timing'
Index exceeds matrix dimensions.
In file "/home/mxma/Tool/spm8/spm_slice_timing.m" (v3756), function "spm_slice_timing" at line 131.
In file "/home/mxma/Tool/spm8/config/spm_run_st.m" (v2312), function "spm_run_st" at line 25.

The following modules did not run:
Failed: Slice Timing

??? Error using ==> cfg_util at 835
Job execution failed. The full log of this run can be found in MATLAB command window,
starting with the lines (look for the line showing the exact #job as displayed in this
error message)
------------------
Running job #1
------------------

Error in ==> spm_jobman at 217

Error in ==> DPARSFA_run at 236

Error in ==> DPARSFA>pushbuttonRun_Callback at 969

Error in ==> gui_mainfcn at 96

Error in ==> DPARSFA at 30

??? Error while evaluating uicontrol Callback

Submitted by YAN Chao-Gan on Wed, 07/20/2011 - 22:21

从出错信息来看，这回估计是Slice Timing的层数或层序与你的fMRI数据不对应。